Development of Robust Cationic Light-Activated Thermosensitive Liposomes: Choosing the Right Lipids.

Extensive research has been conducted on cationic light-activated thermosensitive liposomes (CLTSLs) as a means for site-specific and controlled drug release; however, less attention has been given to the stability of these nanoparticles. Selecting the appropriate lipids is crucial for the development of a stable and responsive system. In this study, we investigated the impact of various lipids on the physical properties of cationic light-activated liposomes. Incorporating poly(ethylene glycol) PEG molecules resulted in uniform liposomes with low polydispersity index, while the addition of unsaturated lipid (DOTAP) resulted in extremely leaky liposomes, with almost 80% release in just 10 min of incubation at body temperature. Conversely, the inclusion of cholesterol in the formulation increased liposome stability too much and decreased their sensitivity to stimuli-responsive release, with only 14% release after 2 min of light exposure. To achieve stable and functional CLTSL, we substituted an equivalent amount of unsaturated lipid with a saturated lipid (DPTAP), resulting in stable liposomes at body temperature that were highly responsive to light, releasing 90% of their content in 10 s of light exposure. We also conducted two atomistic molecular dynamics simulations using lipid compositions with saturated and unsaturated lipids to investigate the effect of lipid composition on the dynamical properties of the liposomal lipid bilayer. Our findings suggest that the nature of lipids used to prepare liposomes significantly affects their properties, especially when the drug loading needs to be stable but triggered drug release properties are required at the same time. Selecting the appropriate lipids in the right amount is therefore essential for the preparation of liposomes with desirable properties.

Establishing a simple perfusion cell culture system for light-activated liposomes.

The off-target effects of light-activated or targeted liposomes are difficult to distinguish in traditional well plate experiments. Additionally, the absence of fluid flow in traditional cell models can lead to overestimation of nanoparticle uptake. In this paper, we established a perfusion cell culture platform to study light-activated liposomes and determined the effect of flow on the liposomal cell uptake. The optimal cell culturing parameters for the A549 cells under flow conditions were determined by monitoring cell viability. To determine optimal liposome treatment times, particle uptake was measured with flow cytometry. The suitability of commercial QuasiVivo flow-chambers for near-infrared light activation was assessed with a calcein release study. The chamber material did not hinder the light activation and subsequent calcein release from the liposomes. Furthermore, our results show that the standard cell culturing techniques are not directly translatable to flow cultures. For non-coated liposomes, the uptake was hindered by flow. Interestingly, hyaluronic acid coating diminished the uptake differences between the flow and static conditions. The study demonstrates that flow affects the liposomal uptake by lung cancer cell line A549. The flow also complicates the cell attachment of A549 cells. Moreover, we show that the QuasiVivo platform is suitable for light-activation studies.

Effects of nanofibrillated cellulose hydrogels on adipose tissue extract and hepatocellular carcinoma cell spheroids in freeze-drying.

The aim of this study was to evaluate the effects of two nanofibrillated cellulose (NFC) hydrogels on two human derivatives during freeze-drying. Native NFC hydrogel is a suitable platform to culture 3D cell spheroids and a hydrogel processed further, called anionic NFC (ANFC) hydrogel, is an excellent platform for controlled release of proteins. Moreover, it has been shown to be compatible with freeze-drying when correct lyoprotectants are implemented. Freeze-drying is a method, where substance is first frozen, and then vacuum dried trough sublimation of water in order to achieve dry matter without the loss of the original three-dimensional structures. The first chosen human derivative was adipose tissue extract (ATE) which is a cell-free growth factor-rich preparation capable of promoting growth of regenerative cells. The release of growth factors from the freeze-dried mixture of ATE and ANFC was compared to that of non-freeze-dried control mixtures. The release profiles remained at the same level after freeze-drying. The second derivative was hepatocellular carcinoma (HepG2) cell spheroids which were evaluated before and after freeze-drying. The 3D structure of the HepG2 cell spheroids was preserved and the spheroids retained 18% of their metabolic activity after rehydration. However, the freeze-dried and rehydrated HepG2 cell spheroids did not proliferate and the cell membrane was damaged by fusion and formation of crystals.

Pectin and Mucin Enhance the Bioadhesion of Drug Loaded Nanofibrillated Cellulose Films.

PURPOSE: Bioadhesion is an important property of biological membranes, that can be utilized in pharmaceutical and biomedical applications. In this study, we have fabricated mucoadhesive drug releasing films with bio-based, non-toxic and biodegradable polymers that do not require chemical modifications. METHODS: Nanofibrillar cellulose and anionic type nanofibrillar cellulose were used as film forming materials with known mucoadhesive components mucin, pectin and chitosan as functional bioadhesion enhancers. Different polymer combinations were investigated to study the adhesiveness, solid state characteristics, film morphology, swelling, mechanical properties, drug release with the model compound metronidazole and in vitro cytotoxicity using TR146 cells to model buccal epithelium. RESULTS: SEM revealed lamellar structures within the films, which had a thickness ranging 40-240 µm depending on the film polymer composition. All bioadhesive components were non-toxic and showed high adhesiveness. Rapid drug release was observed, as 60-80% of the total amount of metronidazole was released in 30 min depending on the film formulation. CONCLUSIONS: The liquid molding used was a straightforward and simple method to produce drug releasing highly mucoadhesive films, which could be utilized in treating local oral diseases, such as periodontitis. All materials used were natural biodegradable polymers from renewable sources, which are generally regarded as safe.

Nanofibrillar cellulose hydrogels and reconstructed hydrogels as matrices for controlled drug release.

Concentrated 3% and 6.5% anionic nanofibrillar cellulose (ANFC) hydrogels were introduced as matrix reservoirs for controlled delivery applications of small molecules and proteins. A further aim was to study how the freeze-drying and subsequent rehydration of ANFC hydrogel affects the rheological properties and drug release of selected model compounds from the reconstructed hydrogels. It was demonstrated that the 3% and 6.5% ANFC hydrogels can be freeze-dried with suitable excipients into highly porous aerogel structures and redispersed back into the hydrogel form without significant change in the rheological properties. Freeze-drying did not affect the drug release properties from redispersed ANFC hydrogels, indicating that these systems could be stored in the dry form and only redispersed when needed. For large molecules, the diffusion coefficients were significantly smaller when higher ANFC fiber content was used, indicating that the amount of ANFC fibers in the hydrogel can be used to control the release rate. The release of small molecules was controlled with the ANFC fiber content only to a moderate extent. The results indicate that ANFC hydrogel can be used for controlled delivery of several types of molecules and that the hydrogel can be successfully freeze-dried and redispersed.

Nanofibrillar cellulose-alginate hydrogel coated surgical sutures as cell-carrier systems.

Hydrogel nanomaterials, especially those that are of non-human and non-animal origins, have great potential in biomedical and pharmaceutical sciences due to their versatility and inherent soft-tissue like properties. With the ability to simulate native tissue function, hydrogels are potentially well suited for cellular therapy applications. In this study, we have fabricated nanofibrillar cellulose-alginate (NFCA) suture coatings as biomedical devices to help overcome some of the limitations related to cellular therapy, such as low cell survivability and distribution out of target tissue. The addition of sodium alginate 8% (w/v) increased the NFCA hydrogel viscosity, storage and loss moduli by slightly under one order of magnitude, thus contributing significantly to coating strength. Confocal microscopy showed nearly 100% cell viability throughout the 2-week incubation period within and on the surface of the coating. Additionally, typical morphologies in the dual cell culture of spheroid forming HepG2 and monolayer type SK-HEP-1 were observed. Twelve out of 14 NFCA coated surgical sutures remained intact during the suturing operation with various mice and rat tissue; however, partial peeling off was observed in 2 of the coated sutures. We conclude that NFCA suture coatings could perform as cell-carrier systems for cellular based therapy and post-surgical treatment.

Technetium-99m-labeled nanofibrillar cellulose hydrogel for in vivo drug release.

Nanoscale celluloses have recently gained an increasing interest in modern medicine. In this study, we investigated the properties of plant derived nanofibrillar cellulose (NFC) as an injectable drug releasing hydrogel in vivo. We demonstrated a reliable and efficient method of technetium-99m-NFC labeling, which enables us to trace the in vivo localization of the hydrogel. The release and distribution of study compounds from the NFC hydrogel after subcutaneous injection in the pelvic region of BALB/c mice were examined with a multimodality imaging device SPECT/CT. The drug release profiles were simulated by 1-compartmental models of Phoenix® WinNonlin®. The NFC hydrogel remained intact at the injection site during the study. The study compounds are more concentrated at the injection site when administered with the NFC hydrogel compared with saline solutions. In addition, the NFC hydrogel reduced the elimination rate of a large compound, technetium-99m-labeled human serum albumin by 2 folds, but did not alter the release rate of a small compound (123)I-ß-CIT (a cocaine analogue). In conclusion, the NFC hydrogels is easily prepared and readily injected, and it has potential use as a matrix for controlled release or local delivery of large compounds. The interactions between NFC and specific therapeutic compounds are possible and should be investigated further.

Biocompatibility of printed paper-based arrays for 2-D cell cultures.

The use of paper-based test platforms in cell culture experiments is demonstrated. The arrays used for two-dimensional cell cultures were prepared by printing patterned structures on a paper substrate using a hydrophobic polydimethylsiloxane (PDMS) ink. The non-printed, PDMS-free areas formed the array for the cell growth experiments. Cell imaging was enabled by using a lipophilic staining agent. A set of coated paper substrates was prepared to study the effect of the physicochemical properties of the substrate (topography, roughness and surface energetics) on cell attachment and growth. The studied paper substrates were found to be cell-repellent or cell-supporting. Cell growth was supported by substrates with a large bearing area, low surface area ratio (Sdr), high total surface free energy and an intermediate electron donor surface energy component. The cells were grown to full confluency within 72 h.

Nanofibrillar cellulose hydrogel promotes three-dimensional liver cell culture.

Over the recent years, various materials have been introduced as potential 3D cell culture scaffolds. These include protein extracts, peptide amphiphiles, and synthetic polymers. Hydrogel scaffolds without human or animal borne components or added bioactive components are preferred from the immunological point of view. Here we demonstrate that native nanofibrillar cellulose (NFC) hydrogels derived from the abundant plant sources provide the desired functionalities. We show 1) rheological properties that allow formation of a 3D scaffold in-situ after facile injection, 2) cellular biocompatibility without added growth factors, 3) cellular polarization, and 4) differentiation of human hepatic cell lines HepaRG and HepG2. At high shear stress, the aqueous NFC has small viscosity that supports injectability, whereas at low shear stress conditions the material is converted to an elastic gel. Due to the inherent biocompatibility without any additives, we conclude that NFC generates a feasible and sustained microenvironment for 3D cell culture for potential applications, such as drug and chemical testing, tissue engineering, and cell therapy.